Cables & Connectors
Cables and Connectors
Seven (7) Foot T1/E1 cable, straight-through, shielded
The 7 ft shielded, straight-through cable is used for connecting Digium T1/E1 interface cards to the PSTN or other T1/E1 equipments. The cross-over cable is the standard cable that should be used to connect T1/E1 ports to T1/E1 ports or equipment. A straight-through cable should only be used when Tx and Rx have already been crossed by another cable or equipment.
Product Code: 3113-00009
Description: Seven (7) Foot T1/E1 cable, straight-through, shielded
Seven (7) foot T1/E1 cable, straight-through, shielded, two (2) pack
The 2-pack, 7 ft shielded, straight-through cables are used for connecting Digium T1/E1 interface cards to the PSTN or other T1/E1 equipments. The cross-over cable is the standard cable that should be used to connect T1/E1 ports to T1/E1 ports or equipment. A straight-through cable should only be used when Tx and Rx have already been crossed by another cable or equipment.
Product Code: 3113-00010
Description: Seven (7) Foot T1/E1 cable, straight-through, shielded, two (2) pack
Seven (7) Foot T1/E1 cable, straight-through, shielded, four (4) pack
The 4-pack of 7 ft shielded, straight-through cables are used for connecting Digium T1/E1 interface cards to the PSTN or other T1/E1 equipments. The cross-over cable is the standard cable that should be used to connect T1/E1 ports to T1/E1 ports or equipment. A straight-through cable should only be used when Tx and Rx have already been crossed by another cable or equipment.
Product Code: 3113-00011
Description: Seven (7) Foot T1/E1 cable, straight-through, shielded, four (4) pack
Seven (7) Foot T1/E1 cable, cross-over, shielded
The 7 ft shielded, cross-over cable if used for connecting Digium T1/E1 interface cards to the PSTN or other T1/E1 equipments. The cross-over cable is the standard cable that should be used to connect T1/E1 ports to T1/E1 ports or equipment. A straight-through cable should only be used when Tx and Rx have already been crossed by another cable or equipment.
Product Code: 3113-00016
Description: Seven (7) Foot T1/E1 cable, cross-over, shielded
Seven (7) Foot T1/E1 cable, cross-over, shielded, two (2) pack
The 2-pack, 7 ft shielded, cross-over cables are used for connecting Digium T1/E1 interface cards to the PSTN or other T1/E1 equipments. The cross-over cable is the standard cable that should be used to connect T1/E1 ports to T1/E1 ports or equipment. A straight-through cable should only be used when Tx and Rx have already been crossed by another cable or equipment.
Product Code: 3113-00017
Description: Seven (7) Foot T1/E1 cable, cross-over, shielded, two (2) pack
Six (6) Foot 50-pin Male-to-Female cable for Twenty-Four (24) port analog cards
The 6 ft 50-pin telephone cable interfaces the TDM2400P card with regular RJ-11 two-conductor telephone cables and is used in combination with either the 24-port, 2-wire breakout box (ACC2400PBO), or the 24-port, 2-wire 19" rack mount unit (ACC2400PPP). The cable has one male end for interfacing with the TDM2400P and one female end for interfacing with other 50-pin equipment. Note: Patch panel and TDM2400P sold separately.
Product Code: 3113-00002
Description: Six (6) Foot 50-pin Male-to-Female cable for Twenty-Four (24) port analog cards
Four (4) port interlocking timing cable for two (2) and four (4) span digital T1/E1 cards
The timing cable allows up to four TE2/4XXP cards to share the same sync (timing) source from the T1/E1 provider, or provide a consistent sync source across multiple cards. The feature is useful for data and fax modes and some voice applications to prevent corruption due to timing slips on the second, third or fourth TE2/4XXP card. Note: Compatible only with cards loaded with 2nd generation firmware or later. Compatible with four (4) span cards. Compatible with two (2) span cards that have the timing cable connector.
Product Code: 3112-00001
Description: Four (4) port interlocking timing cable for two (2) and four (4) span digital T1/E1 cards
